Manual cleaning type UV sterilizer
 |
Brand：TOWIN Product：LP UV Sterlizer Type：TOWIN-FTSD Helpline： 852-96446327 |
Description
The FTSD series UV sterilizer of TOWIN is a split type manual cleaning type over-flow UV water sterilization equipment. UV sterilization is a worldwide recognized environmentally-friendly pure physical sterilization technology that can quickly kill all kinds of bacteria, viruses, algae, spores and other microorganisms, safe and non-toxic by-products, it has the elimination of organic and inorganic chemicals, such as residual chlorine. Emerging pollutants such as chloramine, ozone and TOC have become the preferred disinfection process for various water bodies, which can reduce or replace chemical disinfection.
Specifications
| Inlet and outlet | 1"~12" |
| water treatment quantity | 1~400T/h |
| power supply | 220VAC |
| reactor material | 304/316L stainless steel |
| maximum working pressure of system | 0.8Mpa |
| casing cleaning device | manual cleaning type |
Features / Benefits
1)Reasonable structure, external distribution box, can be placed in separate space and cavity separation operation;
2) Beautiful appearance and durable, the whole machine is made of 304/316/316L (optional) stainless steel material, polished inside and outside, with corrosion resistance and deformation resistance;
3)The equipment withstand voltage of 0.6MPa, protection grade IP68, UV zero leakage, safe and reliable;
4) Configure high-transmission pure quartz tube, use imported UV lamp from Toshiba Japan, the service life of the lamp exceeds 12000 hours, the UV-C attenuation is low and the output is constant during the lifetime;
5)Optional advanced online monitoring instruments and remote control systems;
6)Optional mechanical manual cleaning or automatic cleaning device to maintain efficient UV sterilization efficiency.
Use conditions
Water temperature: 0 ° C ~ 50 ° C;
Ambient temperature: -5 ° C ~ 50 ° C;
Relative humidity: less than 93% (at 25 °C)
Voltage: AC220V±10V，50Hz
Working pressure: 0.8Mpa, it is forbidden over loading working pressure
Sterilization of drinking water: 1cm UV transmittance (T254): 95%~100%; when the original water quality is lower than the national drinking water standard (chromaticity higher than 15 degrees, turbidity higher than 5 degrees, iron content is higher than 0.3 mg / liter), it should be used pre-treatment method to meet the conditions of use of the equipment.
Aquaculture water sterilization: fresh water and seawater filtered by sand filtration or other treatment.
Sewage: According to the sterilization requirements, the water quality of the disinfection equipment is 1cm (T254): ≥40%; the other requirements is meeting the secondary standard of the National Integrated Wastewater Discharge Standard GB8978-1996.
If the water quality, needs to be disinfected, cannot meet the above requirements. It should be properly pretreated, such as flocculation, sedimentation, filtration, etc.Methods to remove various impurities in the water.
Application
Sewage disinfection: municipal sewage, hospital sewage, industrial sewage, oilfield water injection, etc.;
Disinfection of water supply: tap water, surface water (well water, river water, lake water, etc.);
Pure water disinfection: water for food, beverage, electronics, medicine, injection, cosmetics and other industries;
Disinfection of culture water: culture, shellfish purification, poultry, livestock breeding, irrigation water for pollution-free agricultural bases, etc.;
Circulating water disinfection: swimming pool water, landscape water, industrial circulating cooling water, etc.;
Others: water reuse water disinfection, water body algae removal, secondary engineering water disinfection, residential water, villa water, etc.
